Best Oil for Wood – [Reviews & Guide 2019]

Getting an oil for your wooden finished product can greatly improve the quality and durability of your project. Not only does oil penetrate the grains of the wood but it also acts as a coating, protecting the wooden surface from harsh conditions and irritable weather.

However, getting the best product is very important because all the products are not created equally. That’s why we are here, in this article, we will review the best 10 Oil for wood, it’s various specifications and what to look out for when purchasing the best product.

Product NameCoverage (sq ft)Dry time (hours)SheenSize (Fl. Oz.)MaterialPrice
Hope’s 100% Pure Tung Oil

Editor's Choice

up to 150-200least 24low gloss32Tung Oil View on Amazon
Real Milk Paint PTO-G Pure Tung Oil
up to 400-not glossy128Tung Oil View on Amazon
Minwax Antique Oil Finish
up to 125-1500.8 to 1.5semi gloss16Antique Oil Finish View on Amazon
RUST-OLEUM 65531
up to 5502low gloss128Wood Oil Finish View on Amazon
RUST-OLEUM 242219
up to 856low gloss16Danish Oil Wood Finish View on Amazon
Sunnyside Corporation 87232S
up to 150-20012-18glossy32Boiled Linseed Oil View on Amazon
RUST-OLEUM Watco A67141
up to 1708-32Teak Oil View on Amazon
Tried & True Original Wood Finish
up to 150-20024not glossy32Polymerized Linseed Oil & Beeswax View on Amazon
Formby 30064
up to 100-15024low gloss16Tung Oil View on Amazon
Cabot Australian Natural Timber Oil
up to 150-20024 To 48flat32Australian Timber Oil View on Amazon

1. Hope’s 100% Pure Tung Oil, Moisture Resistant Wood Finish for All Fine Woods – Best as Wood Preservative

The Hope’s 100% Pure Tung Oil, Moisture Resistant Wood Finish for All Fine Woods is a ting oil that would give your product a very attractive shine and a beautiful finish. Tung oil is known to be a very prominent naturally drying oil that is gotten from either China or South America and it is known to be the best oil for wood one can find in the market.

Unlike other products, Hope’s 100% Pure Tung Oil, Moisture Resistant Wood Finish for All Fine Woods would sit on the surface of the project in which it is being applied on and it also penetrates deeply into the grains of your project protecting your precious wooden products.

Pros
  • It gives the wood a brilliant shine.
  • It forms a low gloss durable finish.
  • It is a natural oil for wood.
  • It is 100% tung.
Cons
  • Users complain that it still feels sticky even after a month of application.
  • It is suitable for interior surfaces.

Overall Impression

The Hope’s 100% Pure Tung Oil, Moisture Resistant Wood Finish for All Fine Woods is pure tung oil and it is not thinned or diluted. It is great for teak furniture and surfaces and it can as well be used on wooden floors. It gives its users this hand-rubbed color/texture but it is remarkably durable. I totally recommend this product.

2. Real Milk Paint PTO-G Pure Tung Oil – Best on Wood Table

The Real Milk Paint PTO-G Pure Tung Oil is a classic pure tung oil that comes naturally with no additives or solvents. Most companies offer tung oil as anything from a thinned down varnish to a polymerized product. The Real Milk Paint PTO-G Pure Tung Oil does not give its users a glossy finish but it rather penetrates sealing all the grains of the wood protecting it from certain factors.

This product is 100% food safe and it is perfect for surfaces like decks, countertops, bowl, brick, concrete, wooden floor and any other surface which needs a natural coating.

Pros
  • It gives surfaces a waterproof coating which is also flexible.
  • The constant application does not darken the surface over time.
  • It is food safe.
  • It has a long shelf life.
  • It has zero VOCs.
Cons
  • It cannot be applied to an already existing finish.
  • Most users do not like the packaging.

Overall Impression

The Real Milk Paint PTO-G Pure Tung Oil is 100% pure Chinese Tung Oil which produces an all-natural finish and it is manufactured by extracting the oil from a tung nut. It is no solvents or additives added to it. It penetrates deep into the wood surface you want to apply it on sealing the wood grain and protecting it from harsh weather conditions. I totally recommend this product.

3. Minwax Antique Oil Finish – Best on Wood Panel

Manufactured by Minwax, the Minwax Antique Oil Finish is an oil-based protective finish that gives any type of wood it is being applied on a soft and lustrous coating, sealing the wooden surface and increasing its durability. This product is recommended for interior wooden surfaces such as paneling, cabinet, doors, trim and tables.

The Minwax Antique Oil Finish can be used on both finished and unfinished wooden surfaces. When coating with Minwax Antique Oil Finish, users are required to coat at least 2-3 times.

Pros
  • It has a protective finish which gives off a lustrous look.
  • It can be used on both finished and unfinished surfaces.
  • It dries in less than 10 minutes.
  • It helps enhance the beauty of the wood.
  • It penetrates deeply without altering the grain of the wooden surface.
Cons
  • The pouring mechanism is awkward which can waste oil when it is being applied.
  • It doesn’t work well on white pine.

Overall Impression

The Minwax Antique Oil Finish may be used over wood stains to protect and bring out the beauty of your wooden surface. The application of this product is easy and drying time before buffing can take as little as just 10 minutes. Re-coating can be done after 24 hours of the first application. I totally recommend this product.

4. RUST-OLEUM 65531 Watco Gallon Light Walnut Danish Oil Finish – Best on Wood Stain

The RUST-OLEUM 65531 Watco Gallon Light Walnut Danish Oil Finish is a natural oil coating with varnish included in it for interior wooden surfaces. This product packs a lot of features that portray the protective feature of a varnish and finishing properties of true wood oil.

The light walnut color ironically brings out a rich tone when it is applied to any wooden surface. Application of RUST-OLEUM 65531 Watco Gallon Light Walnut Danish Oil Finish is very easy and this oil coating product penetrates deeply into the surface of your finished product for a beautiful finish. This product can be applied on stripped, bare or sanded wood.

Pros
  • The varnish provides your product with more protection.
  • It is safe for sanded, bare or stripped wood.
  • It has a beautiful warm finish which makes it very attractive.
  • Application of this product is very easy.
  • This product doesn’t hide the natural grain.
Cons
  • It is meant for only interior.
  • Re-application of this product darkens over the years.

Overall Impression

The RUST-OLEUM 65531 Watco Gallon Light Walnut Danish Oil Finish is an oil coating that is perfect for wood products with tight grains and surfaces because it is known to penetrate deeply into the wooden surface without destroying the pattern of your finished product. However, the RUST-OLEUM 65531 Watco Gallon Light Walnut Danish Oil Finish does not completely seal the wood therefore this makes maintenance very hard. This can be tackled with constant reapplication to prevent the surface of your job to dry out completely.

5. RUST-OLEUM 242219 Watco Gallon Natural Danish Oil Wood Finish – Best on Wood Grain

This is another product from RUST-OLEUM and it is more unique because it gives a finish which is natural in texture. The RUST-OLEUM 242219 Watco Gallon Natural Danish Oil Wood Finish is an oil-based formula which sinks in deeply into the wood grain. It can be used for both finished and raw or sanded wood.

This oil for wood creates a protection against abrasion spills and chipping. Application of the RUST-OLEUM 242219 Watco Gallon Natural Danish Oil Wood Finish is said to be very easy. Simply wipe on and wipe off to allow the oil for wood to soak onto the surface of your wooden product. Application is most preferred on tight wood grains to get a more superior performance.

Pros
  • It has low VOC.
  • Application is very easy.
  • It dries very easily, 6 hours after application.
  • Creates a natural warm finish.
  • It protects against peeling, chipping, abrasion etc.
Cons
  • Most users complain about opening the product.

Overall Impression

The RUST-OLEUM 242219 Watco Gallon Natural Danish Oil Wood Finish is a very good product from RUST-OLEUM which so far has been getting positive reviews from its users. Although this product seems impossible to open, it still serves as a quality oil for wood which is natural and protects your wooden project from harsh conditions. I do recommend this product.

6. Sunnyside Corporation 87232S Boiled Linseed Oil – Best on Wood without Gesso

Sunnyside Corporation 87232S Boiled Linseed Oil is a classic and plain wood oil that enhances the grain finish of your product without altering or tampering with the color of your natural wood. This product is famously known to be applied over finished products to seal them completely and prevent any crack or damage any condition may bring.

Unlike regular linseed oil, this product has been boiled to cut down the drying time drastically when compared to a raw product. The Sunnyside Corporation 87232S Boiled Linseed Oil has a dry window of only 12 – 18 hours for a uniform finish. It is also waterproof and it is safe for mostly antique products or furniture.

Pros
  • It is boiled to cut down the drying time.
  • It is waterproof.
  • It prevents chalking.
  • Brings out the beauty of the wood grain without changing it.
  • It is applied to existing finish to strengthen it.
  • It is used for both exterior and interior surfaces.
Cons
  • It has a strong odor.
  • It is not safe for products that are meant for food one way or the other.

Overall Impression

One thing we loved about the Sunnyside Corporation 87232S Boiled Linseed Oil is that it is used for both interior and exterior surfaces. Although it is safe for most furniture and antique finishes, it is not safe for food-based products because the agents used to speed up drying is not safe for consumption. I totally recommend this product.

7. RUST-OLEUM Watco A67141 Teak Oil Finish – Best on Wood Furniture

Just as the name implies, RUST-OLEUM Watco A67141 Teak Oil Finish is suitable for hardwood such as rosewood, mahogany or teak. His oil for wood penetrates deep into the grains of the product it is being applied on and it doesn’t leave a crack on it.

This oil for wood is made to be UV and water resistant and it is great for quick project because of its fast drying feature. The RUST-OLEUM Watco A67141 Teak Oil Finish is suitable for both interior and exterior surfaces and customers are advised to use it only above the water line.

Pros
  • It is resistant to Ultraviolet rays and water.
  • It can be used in both interior and exterior spaces.
  • It dries quite quickly.
  • It is suitable for above the water line.
  • It penetrate and form a deep coating on the grains of the wood.
Cons
  • It is not to be used on softer woods.
  • It is not food safe.

Overall Impression

The RUST-OLEUM Watco A67141 Teak Oil Finish contains a bit of varnish which helps further protect the condition of your wood product. It has a lovely warm finish but constant use over time can darken the surface of the product it is used on. I recommend this product.

8. Tried & True Original Wood Finish – Best on Wood Acrylic

Tried & True Original Wood Finish is an original oil for wood which was first invented in the 19th century and it has been used since then due to its unique features. Combined with beeswax, this highly polymerized linseed oil is safe for toys, cutting boards and even children’s wooden equipment.

Not only that it is safe for the younger generation but it is also labeled by the FDA as food safe meaning it can be applied on surfaces that hold food. Drying on the other hand is easy as this product dries after few hours of application.

Pros
  • It has no metal heavy driers or solvents.
  • The final finish would shine without a glossy appearance.
  • It is very durable.
  • It is a true all purpose oil for wood.
  • It is food safe.
Cons
  • It is advised to be used only in interior surfaces.
  • It has a lasting awful smell.

Overall Impression

The Tried & True Original Wood Finish is a great product you can get for your wooden surfaces. It is natural and it helps seal your wood protecting it from different conditions. Users usually complain that the odor of this product seems to be too strong and it also last for a long period of time. However, if you don’t care about that, this is a really good product that is worth trying out.

9. Formby 30064 30064000 Low Gloss Tung Oil Finish – Best as Wood Treatment

Formby 30064 30064000 Low Gloss Tung Oil Finish is a type of oil for wood that protects the finish of the wood without altering the nature of your woodwork’s grain. Used only in interior projects, this oil for wood dries clear so it can be used as a complement and it prevents chalking by resisting both water and mildew.

Due to the fact that the Formby 30064 30064000 Low Gloss is a Tung Oil Finish, it is perfect for users that prefer a sanity finish to a glossy finish. This also makes it a perfect choice for wood surfaces with imperfections.

Pros
  • This oil for wood dries clear.
  • It complements an already existing finish.
  • It is resistant to water and mildew.
  • It has a low gloss option which is okay for grains with imperfections.
Cons
  • Used only for interior purposes.
  • It is not suitable for wooden floors.

Overall Impression

The Formby 30064 30064000 Low Gloss Tung Oil Finish has a low gloss option which is suitable for imperfect surfaces giving it a hand-rubbed finish. This is because due to the more glossier the surface is, the more first and scratches can be noticed, so it comes in various choices that fit your taste. I totally recommend.

10. Cabot Australian Natural Timber Oil – Best on Wood in Painting

The Cabot Australian Natural Timber Oil gives its users the option of a matte finish which is known to penetrate deeply into the grains of the wood making it more durable and stronger as usual. This company gives you the ability to add more sheen if you really need a dull surface but it never ends in a glossy look.

The Cabot Australian Natural Timber Oil is solvent-based so the odor would be so bad meaning you have to get enough ventilation during application. It is perfect for both natural grain and hardwood grain.

Pros
  • It is moderately water and UV Resistant.
  • Sheen increases with coating.
  • If is perfect for hardwood grains.
Cons
  • It takes quite some time to dry.
  • It has a very strong odor because it is solvent-based.

Overall Impression

The Cabot Australian Natural Timber Oil is simply a combination of linseed and tung oil. This causes the product to take time during drying. It may take about two days for this product to completely dry on the surface and seal the grains. It is both water and UV resistant.

Buyer’s Guide

What are the Choices?

Different oil for woods are provided for different situation and getting the best can affect the lifespan of your wood.

Oil and Varnish Blend

If you purchase this type of oil for wood, you may get the best features which is associated with both types of oil finish. The varnish in this case strengths the product giving it durability while enhancing its colors while on the other hand, the oil is responsible for the condition and application of this type of finish. This type of oil finish takes its weather and water resistivity seriously making it a choice which you can overlook. Some oil and varnish blend products are proven to be resistant to ultraviolet rays.

Tung Oil

When Tung oil is applied on a finished product, it may take a very long time to dry so most tung oil products have chemicals and additives which can help speed up the drying process. Users using this type of oil finish can also treat the coating with heat to speed up the drying time. Tung oil is a moisture resistant coating which is perfect for hardwood due to its penetrating features. When it is applied to hardwood, more power is needed to penetrate their tight grains.

Wax

Wax is not considered a finish but it as an agent that helps improve the condition of your wooden project or protect it and retain its color irrespective of factors like aging. It is preferable to be used together with other finishes.

Olive Oil

Being a vegetable based coating, Olive Oil acts as a natural non-drying wood oil which is also similar to peanut oil. Oil based coatings such as olive oil or vegetable oil should be avoided if one is coating food storage bowls because this would leave a sticky smelly finish that make stored food go sour.

Mineral Oil

Mineral oil is used by woodworkers because of its specific properties such as the non-drying and very low sheen. Mineral oil are food safe and it is available for use on wooden kitchen equipment and did to the fact that they are non-drying, they can be easily washed away.

Mineral oil is considered more as a treatment for wood than a finish because of its none-drying nature and they will not form a solid film on your wooden project. Mineral oil which is light enough can be used to coat products such as ornament bowls.

Varnish

Varnish boasts of adding a colorful finish to your wooden projects. Varnish is made using a synthetic resin which ends up infiltrating the wood surface and sealing it. If your goal is to seal your wooden project’s surface to protect it from moisture, consider using a oil which would be a better choice for you. Varnish cures by using the same process that oil uses which is called polymerization, but it is much more durable than oil.

Danish Oil

Danish oil is known to protect wood against heat, chemicals and stains and it is more of a mixture of thin oil with varnish. Danish oil takes at least 15 minutes to get into the surface of the wood and application of each layer should be done only once a day. Multiple layers would create a protective layer which would build up a thick coating like wood varnish.

It is also important to know that danish oil dries faster than linseed oil and this type of coating is most suitable for fresh or new wooden surfaces.

Linseed Oil

Most linseed oil used to coat wooden products and structures are mostly boiled. This is because it takes a very long time for normal raw linseed oil to dry when it is being applied. Boiled Linseed oil is very smooth when applied to any wooden surface and it dries to protect the surface of your project from various factors. If you want to go for Linseed oil, go for the one which is boiled or better yet, look for a “polymerized” or “heat treated” products. Other forms of linseed oil may include raw linseed oil which has been added chemicals to speed up the drying process. Although this seems much more reasonable but they produce toxic fumes which can be so uncomfortable during application.

Other Finishes

Other types of oil wood finish may include lacquers and shellac and they give a very bright shiny finish. These type of oil finish product create a thin layer of coating which is known to be reflective. These type of oil wood finish is not suitable for woods that the surface have a number of imperfections because the shiny finish brings out the imperfection. It can be used for wood products with perfect surface because it enhances the grain. They dry on top of the surface which it is applied on instead of penetrating and entering the wood pores.

Conclusion

Hopefully, our review and buyer’s guide on the best oil for wood have helped you learn more about it and the type of oil products in the market out there. We believe that our review would be able to help guide you on which type of oil you need for the type of wooden surface you used in your project. You can research more on the choice of wood oil you plan on using.

Leave a Reply

Your email address will not be published. Required fields are marked *